Thursday, January 23, 2014

Fuel Filtration and Recycling: Technology That Minimizes Hazardous Materials & Waste

When it comes to fuel filtration and recycling, there are many ways to go about conducting this task. Commonly done when fuel is within a storage tank, fuel filtration can be achieved with the help of a professional company with right resources and proven processes. Experienced fuel cleaning companies are aware of the most effective and safe techniques to properly purify fuel and thus minimize the risk or hazardous materials and wastes entering into the environment.

Fuel Filtration Systems That Work

One of the best ways to conduct fuel filtration would be the Filter Flush method. In case of this method, you need to have a professional insert a suction host into your fuel tank. This semi-flexible hose is capable of filtering the fuel by sucking up the contaminants that are located at the bottom of the tank. The hose does not stir up the contaminants and cause it to be swirled around the fuel tank, but rather it sucks it straight out in an efficient manner.

In order to filter the fuel in a more effective way, the fuel cleaning expert has to take the help of a filtration unit which is made up of a water separator and filters. The end result would be fuel which seems as though it has been pumped straight out from the oil refinery and cleaned down to just about 25-35 microns!

It is a well-known fact that all fuel storage tanks have vents. While vents may be necessary but what it does is that it sucks in outside air into the fuel tank, this air would contain microscopic bacteria spores, humidity, airborne particles and so on. These would contaminate the fuel tank, thereby increasing the need for fuel filtration. At times the fuel tank can also be contaminated by water. Since fuel is lighter than water, it will therefore underneath the fuel and create an interface.

The pickup pipe used for extracting fuel from the fuel tank does not touch the bottom of the fuel tank. When the fuel tank is full, gravity will cause the clean fuel to rise at the top of the tank and get sucked in by the pipe. However, as the fuel level reduces, the contaminants present in the fuel would become noticeable as they begin to enter the pickup pipe.

Maintain Clean Fuel Tanks to Sustain Optimal Quality Fuel

Just like water tanks, fuel tanks too need to be taken care of, filtered and recycled from time to time in order to ensure that you have a supply of clean fuel always. Two of the don’ts when it comes to fuel tank cleaning and filtration are using a biocide alone, or using dispersing additives in the fuel tank. These two methods are just not effective and they do more harm than good.

Fuel based companies in oil-rich areas like New Orleans find great value in these services. Taking care of fuel tanks with fuel filtration and cleaning is definitely something that would benefit you because anaerobic bacteria spores would live in the fuel/water interface. Since these do not require oxygen therefore they can thrive and multiply in the interface.

Aerobic bacteria, on the other hand, are bacteria which require air. For instance: bacteria, fungi, etc. If the fuel tank is ignored for a long time then it runs the risk of developing corrosion and having accelerated pitting. Hence, it is essential to engage in fuel filtration from time to time to keep the fuel safe and clean.

No comments:

Post a Comment