An Inside Look at Robotic Spine Surgery

The primary goal of spine surgery has always been to help the patient realize a successful and sustainable outcome with minimal complications. However, in the last fifteen to twenty years when technology in the medical field has taken off, robotic spine surgery has allowed for more specific goals and objectives with greater efficacy.

Some of the most goals behind robotic spine surgery include: allowing the patient to return to as normal a life as possible after surgery; to get them to that point as quickly as possible; and to minimize the amount of trauma done to the body during the surgery. If you think you might be a good candidate for robotic spine surgery, then read on to learn more.

Advantages of Robotic Spine Surgery

As a form of minimally invasive surgery (or MIS,) robotic spine surgery has many benefits. There is improved safety when using a robot guided by the CT or MRI scans of the patient. The robot knows where to, and where not to, go. This is true for both simple and complex surgeries so accuracy rates have risen dramatically when it comes to MIS spine surgeries, resulting in fewer instances of patients having to have their spinal surgery re-done within a few years.

Also, there is a minimized use of radiation, as the CT or MRI scans only have to be done once prior to the surgery, instead of having to have the patient under constant radiation in the operating room to see where the instruments are in the spine as most robotic devices are also equipped with cameras.

For more insight regarding the advantages of robotic spine surgery, see the video below of Mazor's Spine Assist technology:

 

Applications for Robotic Spinal Surgery

There are many types of spinal problems that robotic spinal surgery can be used for, including: degenerative spinal conditions, spine tumors, spinal deformities, and more. If there is a slipped disc or instability in an area of the back, the robotic spine surgeon may perform a fusion of two or more vertebrae. Before robotic spine surgery, this would include an incision to open up the back long enough to expose all vertebrae involved in the fusion.

Now, it can all be done with the robotic device using MIS. Because of this, the recovery time for this type of surgery has drastically reduced and patients are getting on with their lives faster than ever.

A study done recently looked at over 600 surgeries where nearly half were considered MIS. Over 3,200 implants were placed during these surgeries and the overall accuracy rating was over 98%. The use of robotic spine surgery compared to open surgery on the spine has led one study to determine that implant accuracy has improved by at least 70%, the radiation that patients get with each surgery has been reduced by over 50% and the amount of time that each patient stays in the hospital after surgery has been reduced by over 25%.

There are many types and designs of robotic spine surgery devices and each one is proprietary to the manufacturer and the surgeon that uses each one will need training on how to use them. Chances are that a spine surgeon will have a preferred robotic spine surgery unit that he prefers to use so that he or she is comfortable with it every time in the operating room.

Athletic Apparel Technology Behind Today's Top Cycling Jerseys

Cycling is passion that many individuals enjoy for countless hours at a time. For this reason, it's essential for cyclists to wear top-quality jerseys made from premium materials and fabrics to help keep them dry and comfortable.

In this post, we're going to take a close look at some of the athletic apparel technology behind today's top cycling jerseys. So if you're shopping for a new cycling jersey, you may want to consider buying a product tailored from one of the follow types of fabric.

Airpass Pro+

Primarily composed of polyester, Airpass Pro+ is one of the most popular and widely-used material for cycling jerseys. This type of fabric is common because of the advanced moisture-wicking technology used in its manufacturing. Due to this technology, the perspiration is wicked from the body, and even after copious sweating, the jersey can still remain dry. This feature makes it very comfortable for the cyclists.

The material of Airpass Pro+ is also designed with AIRthrough for ensuring maximum breathability. Airpass Pro+ also provides 30+ SPF UV protection. The fabric is used by many companies, including Sobike, Excelsior, Brainstorm Gear and Retro2Ride.com cycling jerseys. The many benefits of this material include its quality of being able to dry quickly, sun protection and breathable.

Bio-Ceramic 

Bio-Ceramic has been recently introduced to the market of cycling jerseys and is gaining a lot of attention and demand. It is being appreciated by professional cyclists for its high level of comfort. Bio-Ceramic is composed of ceramic oxides and natural minerals. Both these elements are then mixed together at very high temperature. Due to this composition the material is able to release far infrared light which then helps in stimulating the blood flow by penetrating deep down into the muscles.

As a result, the stamina is improved and helps to reduce the body aches. Bio-Ceramic material is also very absorbent in nature and it has a very soft touch. Due to all these features the jerseys made from this material are very expensive. Ale, Santini and arragons do make use of this material for their cycling jerseys.

Merino Wool 

Merino Wool is another popular material used for manufacturing cycling jerseys, particularly vintage-style cycling jerseys. The material is the most water resistant material available in the market. It has around ten times more ability to absorb and release the moisture, if compared with polyester and nylon based materials.

Merino Wool acts according to the weather. In warm weather, it keeps the cyclists cool by using the quality of heat absorption and evaporation. While in cold weather it traps the body heat so as to keep the athletes warm. It can be used in sunny days as well as it is UV resistant. It also has the quality of being odorless and hardly gets any stain. Merino wool is very soft in touch and perfect for sensitive skins. Isadore, TORM and jura cycle clothing are few brands that manufacture merino wool cycle jerseys.

All the cycle jersey materials have their own features and qualities. The type of material chosen by the cyclists depends on many factors like weather, area and skin type. Choosing the right type of clothing improves the performance largely.

Formax Pressure Sealers: 5 Machines for Optimal Workflow

Formax is at the forefront in the manufacturing and design of innovative paper processing technology, particularly pressure sealers. Formax pressure sealers employ innovative AutoSeal technology that is patented and designed to optimize pressure sealing workflow for users. Formax also provides desktop solutions ideal for small offices upwards to multinational corporations.

Formax pressure seal mailers are the ultimate solution for a variety of business documents that can be printed on a piece of paper. This effectively saves time and costs. Thus results in a secure document with a professional look.

Formax partners with reputable and established companies like the Walz Labeling and Mailing Systems as dealers for their high quality products. The following are some of the leading pressure sealer products in Formax product portfolio.

Formax FD 2002 Pressure Sealer

The FD 2002 pressure sealer from Formax is one of the most powerful pressure sealers manufactured by the company. It is capable of handling and effectively processing self-mailers that are sensitive.

The Formax FD 2002 pressure sealer has integral folding plates that make setting it up and using it all the more easier. In order to ensure precision folds, the FD 2002 has knobs for fine tuning. It also has a three roller drop in mechanism. It features an integral touchpad control panel that is quite easy to use. Its features also include:

1. Hopper load capacity of up to 250 forms
2. Speed of 8000 forms per hour
3. Fully enclosed storage cabinet
4. 18 inch conveyor with foto eye technology

Formax FD 2032 Pressure Sealer

The Formax FD 2032 pressure sealer is able to process sensitive self-mailers efficiently. It can process forms with lengths of up to 14 inches. This pressure washer is capable of processing up to 11000 forms in one hour. Its feeder can accommodate up to 350 forms at any given time.


Users of the Formax FD 2032 pressure sealer have a choice of two conveyors. The conveyors have an integral foto eye feature which ensures that forms are arranged in a sequential fashion. The FD 2032 standard features include:

1. Fog control
2. LED indicators
3. Six digit counter
4. Fault detection
5. Touch pad control panel

Formax FD 2084 Pressure Sealer

The Formax FD 2084 pressure sealer is able to process 2800 forms an hour, making it one of the most advanced and top-of-the-line Formax pressure sealer machines.This translates to about 400000 forms in a month. These pressure sealers utilize pressure seal technology. The FD 2084 is able to process continuous pressure seal forms in an organization of medium size and in terms of volume.

1. It is capable of folding, separating and sealing seal forms in a continuous fashion in a line.
2. The pressure sealers can store up to 3 custom fold configurations in its internal memory.
3. It is able to process forms with lengths of up to 20 inches. It is a heavy duty pressure sealer with continuous feed capability.

Formax FD 2054 Pressure Sealer

The FD 2054 is one of the most powerful pressure sealers from Formax. It is fully automatic and is efficient and quite easy to use. It is able to automatically detect and adjust accordingly depending on the length of the form. It detects different lengths from 11, 14 and 17 inches. It is one of the most efficient pressure sealers currently available in the market.

Formax FD 2002IL Pressure Sealer

This is one of the Formax pressure sealers that are able to effectively interface with laser printers that have specific MICR capabilities. The Formax FD 2002IL pressure sealer also integrates seamlessly with non-MICR desktop laser printers. This ultimately ensures that it is able to provide enhanced and foolproof document security.

3 Computer Shops in Peoria for Impeccable Customer Service & Products

Are you look for some of the best computer shops in Peoria, Illinois? The good news is there are plenty of Peoria computer stores to choose from, and some offer comprehensive technology solutions that may have becoming a loyal local customer.

Personality matters as does the right inventory of computers. Each computer shop you see here offers a great variety of computers combined with knowledgeable customer service. Let's get the conversation started and take a look at three top-rated computer shops in Peoria, IL.

Nerds on Call

Boasting a reputation for timely and reputable services for computers in Peoria and the neighboring areas, Nerds on Call is well-known destination for a wide range of computer products, repair and virus removal services. As part of the Facet Tech family of company, Nerds on Call is supported by some of central Illinois' leading IT and technology specialists.

Their website says "We Can Fix It." Any that means just about any computer or digital device, including iPods, Apple computers, and other brands. And unlike other local computer shops in Peoria, IL, the experts at Nerds on Call also offer a life chat on their website if you have any questions.

Focusing on almost every type of computer repair imaginable. from Mac and Apple to PC repair Nerds On Call has become the trusted source for locals in a wide range of computer needs. What you may not already know is Nerds On Call specializes in custom computers for both high-end professionals and gamers. This is in addition to being experts in computer repair and virus removal services making them a full-service solution in Peoria for all things computers.

If you have ever had high-end business or gaming needs, then you will understand the importance of this specialty. With the ever changing specific needs within niche business and gaming you often need more in one area and less in others. For instance gamers require very specific type of graphics and response from the input mechanism or they can fall behind in global rankings. The highest speed internet can only take you so far without a machine that becomes an extension of that speed.

Retro Tech

Ready for a computer shop with a museum in it? Then you are ready for Retro Tech. This shop is actually a non-profit organization that collects electronics and computers then gives them the refurbishment treatment to offer them to people in need.

Driven by an internal mission statement of "Bridging the Digital Divide" they provide computers to assist seniors, students, physically challenged, and low income people for over fifteen years now. As far as numbers go they have supplied up to two hundred computers a month to those they service.

The good news for the general public is items not used in this service are offered in the Retro Tech thrift store. Of course they are made available at a price that is discounted.

Geek Squad

Have you ever noticed those uniformed geeks hanging out inside Best Buy helping people bringing computers back into the the store. This is Geek Squad.

Because of their relationship with Best Buy you can expect a wide variety of this and last season's computers. Having been a thriving computer business for years, you are also promised national chain quality educated customer service. With Geek Squad, you can expect main stream, mass market-focused service that can handle a little bit of everything.

Going beyond Best Buy's store hours, you can expect 24/7 computer technical support via their website. You can also schedule an appointment online, reschedule or even cancel. One specialty you may not expect here is the retrieval of files accidentally lost or deleted. Even from a hard drive crash. They say songs and photos are the most common cause for retrieval requests.

The same holds true for business. With the capability to custom build you will both save money on the unneeded mass market inclusions and blow the competition away. But that is only if you possess the same mad skill as Nerds On Call at doing what you do.

There you have it: three great shops to find computers and computer service in Peoria, IL. Remember to lead with your need, do your research, an you will never go wrong.

On-board Weighing Systems: Versatile Truck Scales & Weighing Technology

 On-board weighing systems, which are commonly applied as on-board truck scales, are integrated directly on vehicles and equipment to accurately and seamlessly weigh large loads without an external unit. These weighing systems enable users to determine the weight of loads directly from the cab or a readout interface. In short, on-board weighing systems help in increasing efficiency and throughput for a number of heavy-duty weighing applications.

On-board weighing technology is commonly applied in mining, waste management and in agriculture. Below we share a few common applications of on-board weighing systems in these sectors.

1. On-board Weighing for Mining

On-board weighing systems are often integrated on conveyors, making
it easy for miner to calculate the weight of payloads directly from the
conveyor belt system.

There are a variety of on-board weighing systems for various load carrying vehicles used in the mining industry. These include:

• Haul Trucks scales - These scales are designed in such a way that they provide in-motion weighing. They have a vigorous communication gadget that enables the driver to check the payload from the cabin. Additionally, they have unique sensors that alert the driver in case of the truck is overloaded.
• Articulated trucks scales - These on-board weighing scales are usually for dump trucks and are rigid and also those with middle pivot steering. They facilitate weighing while the truck is when it is loading, moving and when unloading.
• Conveyors - conveyor belt scales are suitable for various stationary applications in mining. These on-board weighing systems can be monitored by a single controller thereby reducing the costs of supervision.

2. On-board Weighing for Waste Management

In waste management industry, there are dump truck scales. These on-board weighing scales are designed to work in majority of dump trucks to offer simple and effective weighing solution. For instance, the on-board weighing systems and on-board truck scales from suppliers like Walz Scale can offer precise results in harsh conditions and re field installable.

3. On-board Weighing for Agriculture & Farming

On-board weighing systems in agriculture are available in different sizes and shapes. They are designed in a manner to ensure farmers get efficiency especially when harvesting. Examples of on-board weighing scales in agriculture include:

• Grain cart scales - These scales offer solution to farmers who wish to weigh their harvested grain. They are available in various mounting systems and weighing bars thereby making it easy to install them straight to grain carts or similar equipment. Grain cart weigh scales enables farmers to enjoy convenient and easy weighing solution in any season.
• Haul trucks - These scales are available in strain gauge and hydraulic systems. They offer in motion weighing and field serviceable. They are also field installable and can weigh while loading and dumping. They have multiple communication options.

These are just some of the on-board weighing systems as many more are available to serve different purposes.

This is digital readout display equipped with
PFREUNDT on-board systems. This tells the users the
currently load weight directly from the cab.

PFREUNDT: A Leader in On-board Weigh Systems

PFREUNDT is a German company that specializes in developing, engineering and manufacturing on-board weighing systems. PFREUNDT is a leader having pioneered and revolutionized the global technology in on-board weighing systems.

PFREUNDT is famous for displaying a high degree of reliability. It is one of the most popular companies worldwide in the extraction, extraction, recycling business and disposal. The on-board weighing systems from PFREUNDT are therefore reliably applied in mining, dumping and agriculture. The company has made superb reputation that which has enabled it to partner with other companies requiring on-board weighing systems.

PFREUNDT has continued to enjoy global recognition among its partners because of producing superior quality on-board scales. Its products are strictly examined and controlled. The company has thrived in understanding the unique needs of the customers whether large or small.

In North America, PFREUNDT partners with leading suppliers to reach customers in the region. An excellent example of PFREUNDT supplier is Walz Scale which is based in Illinois. You can learn more about this truck scale supplier and on-board weighing system company at WalzScale.com.

The Science & Technology Behind Minimally-Invasive Spine Surgery

Minimally-invasive spine surgery is a type of surgery that minimizes damages of soft tissue such as muscles. Minimally-invasive spine surgery is always less risky and less invasive option when compared to the traditional open spinal surgery.

Shown here is Dr. Joshua Rovner, a reputable New Jersey
spine surgeon and advocate of minimally-invasive spine surgery.

In most cases, minimally-invasive spine surgery often uses a thin, lighted tube whenever one put through a small incision or cut during a surgery. In the medical industry today, spinal surgeons use it when finding problems like cysts, adhesions, fibroids and severe infections.

Many spine and orthopedic surgeons often used advanced procedure of minimally-invasive spine surgery that can be performed exclusively via one single entry point – that means using only one single small incision. In some cases, you can call it as Single Site Laparoscopy. Minimally-invasive spine surgery always has many advantages over open traditional procedures that has made it one of the most recommended surgery techniques that are quickly becoming adopted by the top orthopedic spine surgeons, like Dr. Joshua Rovner of New Jersey (shown in the image above).

The Primary Goals Behind Minimally-Invasive Spine Surgery?

Here are the two main goals of minimally-invasive spine surgery:

• Decompression - Minimally-invasive spine surgery is used when taking pressure off (or when decompressing) your nerve roots or spinal cord during surgery. The pressure can sometimes cause severe pain and pinched nerves. The goal of minimally-invasive spine surgery procedure is always to relieve the pressure at the same time reducing pain of a patient during surgery.
• Stabilization - In some cases, mobile segment can be one source of abnormal movement or pains in the body after a surgery. When this does happens, surgery stabilization may be needed. Minimally-invasive spine surgery is typically a good fusion, which is done with more instrumentation. Orthopedic surgeons often use it these cases to reduce the severe pain and tissues damage.

Top 3 Minimally-Invasive Spine Surgery Techniques

The three main minimally-invasive spine surgery techniques include the following:

1. Mini-Open Spine Surgery

Mini-open spine surgery is less similar to the traditional open procedure and has fewer risks, like less loss of blood during and after surgery and less infection risks since incision is smaller. Many advances in visualization in medical field today have made possible to have mini-open surgical procedures.

2. Tubular Spine Surgery

Tubular spine surgery involves use of a tubular retractor that acts as a tunnel, which passes through muscles of the back to access spine. Minimally-invasive spine surgery using a tubular retractor is usually called "muscle-splitting" approach. When you compare it to the open spine surgery, it has less blood loss and muscle damage when using this tubular retractor.

3. Endoscopic Spine Surgery

Endoscopic spine surgery uses a very tiny video camera known as an endoscope—that is much smaller compared to a dime—when passing through very small surgical incisions (often less than 1.5 cm) as a way to access a spine. Many neurological surgeons commonly refer to the procedure as "keyhole surgery" since endoscope will always guide surgeon by showing them a view of internal body on the screens in an operating room.


These three types of minimally-invasive spine surgery can be used in various spine surgeries, such as foraminotomy, discectomy, and laminectomy and a laminotomy. Sometimes a orthopedic surgeon can use fluoroscope during minimally-invasive spine surgery since fluoroscopes have X-rays that can guide them during the procedure.

In conclusion, the above is a review of the science and technology behind minimally-invasive spine surgery that patients should know.

An Inside Look at Rapid Release Technology

Rapid Release Technology is a groundbreaking invention utilized within the therapeutic arena for the purposes of relieving soft tissue problems, especially the kind that affects the nerves, tendons, and muscles.

Rapid Release Technology (RRT) depends on targeted high-speed vibrations to break apart scar tissue and adhesions. RRT operates at a very high frequency with small strokes, this not only ensuring that patients are comfortable but delivering lasting results.

When used properly, RRT should deliver results in just a few sessions.

Who Needs Rapid Release Technology?

RRT has become commonplace in physical therapy and mobility sessions because of the complementary role it plays in chiropractic care, sports massages, triathlon coaches, and other forms of therapy. In fact, one chiropractor in Berkeley, California is seeing great success with his patient using RRT. He is one of the few practitioners using Rapid Release Technology in San Francisco Bay Area.

If you have a history of old injuries and repetitive stresses, then you will find some use for Rapid Release Technology. When muscles are overused or incur injury, scar tissue forms in the body. Scar tissue is the result of a temporary patching mechanism initiated by the body to contend with wounds caused by repetitive stress, surgery or injury.

Made from collagen, just like the skin, because scar tissue has no blood supply, it tends to dry out, growing stiff and hard in the long run. When scar tissue becomes fastened to tissues that are not normally connected, it becomes an adhesion.

The presence of adhesions can cause pain, nerve entrapment and numbness, this along with limiting one’s range of motion. While there are various traditional therapies that have been designed to deal with such complications, most of them short.

Rapid Release Technology has, thus far, proven to be the most effective means of breaking up painful adhesions, releasing muscles and nerves and granting the body optimal health.

The capabilities of RRT are not restricted to scar tissue. The treatment approach has been used to contend with ailments such as headaches, back pain, ankle pain, tendonitis, knee conditions, tennis elbow, shoulder pain, carpal tunnel syndrome and pinched nerves to mention but a few. The number of treatments required and their duration will vary depending on the patient and the severity of their medical condition.

How does Rapid Release Technology Work?

The operations of Rapid Release Technology revolve around the science of resonance. Think of an Opera singer that shatters glass across the room using vibrations. RRT produces high-speed compression waves that reverberate through the body, targeting scar tissue adhesions with a specific frequency.

Rapid Release Technology rarely requires more than five minutes to deliver the results it promises, freeing up adhesions and relieving pain even while improving one’s range of motion. More than merely attacking scar tissue, the frequency at which RRT operates also triggers what is known as the tonic vibration reflex which not only relieves cramping but spasms and guarding as well.

By increasing the hyaluronic acid pressure in the place where the fascia resides, Rapid release technology will also create additional space between fibers, this easing movement, especially since the muscles and ligaments can now move more smoothly over one another.

There is really no end to the benefits RRT brings to the table. If you have exhausted your options for medical doctors and you haven’t really benefited from the surgeries, acupuncture, traditional chiropractic sessions and other treatments, it might be time to complement your physical therapy sessions with Rapid Release Technology. Whether you're a multisport athlete looking to become a better triathlete or simply want a solution to improve mobility and get out of pain, RRT offers a sound solution.

Portable Axle Scales: 3 Advancements in Technology & Design

The use of portable axle scales has accelerated significantly in the recent decade. This is primarily because portable axle scales are more convenient, affordable, and versatile compared to more conventional truck scales, such as steel-deck weighbridge scales.

Portable axle scales are also known to be more efficient and accurate. This is a result of advancements in portable weighing technology that have made axle scales and wheel weigher systems advantageous for many different users.

Since these weighing systems were introduced, there have been revolutionary advancements in their technology and design. These advancements have in turn made portable axle scales more functional and efficient for different applications. As a result, more companies prefer to use these types of portable trucks scales to weigh trucks and their loads.

Stronger Components

One of these advancements in portable axle scales technology and design include being made using stronger components. This is an important aspect that gives these modern weighing systems a big advantage. Majority of these systems are being made using stainless steel which is known to be one of the strongest metals. The steel being stainless and strong means that the systems can withstand harsh elements of years of use.

The importance of this is that portable axle scale systems are usually used in places with harsh conditions which can easily cause damages if the systems are made using weak components. But the stainless steel ensures these systems do not get damaged easily and therefore they can be used for years without getting damaged. Besides providing optimum efficiency, the stainless steel reduces the repair and replacement costs which would have otherwise been caused by having relatively weak components.

Low Profile Design

Another revolutionary advancement on these axle scales which are portable is being made in a low profile design. This means that the people using these elements do not have to dig small trenches to construct the scales. Good examples are those from Walz scale which come with low profiles therefore allowing them to be used by setting them on the appropriate place.

This increases convenience in their use since there is no restriction that they can only be used in a place where it is possible to dig small trenches. The fact that there is no digging also reduces the time and effort that is used to set these scales.

In-Motion Weighing Capabilities

These portable truck scale systems also have the ability to perform in-motion weighing. This means that the vehicle being weighed by this scale does not have to be static for the measurements to be made. Instead, they are made in a way that users can gather accurate weight readings even while the vehicle is passing over the scale at low speed of 3-5 MPG.

In-motion weighing with portable axle scales also increases the convenience of using these scales and also saves on time. Furthermore, taking the weight readings while the vehicle is in motion captures all the aspects of the weighing process and as a result the recordings are more comprehensive.

Portable axle scales and truck scales from Ag Weigh and Walz Scale come with a convenient carry case for optimal mobility.

All the revolution advancements on these systems are meant to make sure users are able to use the systems in a more interactive manner. These improvements make the scales easier to use while at the same time providing more accurate results. The improvements have been put in place gradually but currently almost all the companies that make these scales ensure their scales have all the modern qualities.

However, it is always advisable to check for these qualities while deciding on which portable scale to use. Therefore, technology advancement and innovations have resulted to helpful revolutionary advancements in portable axle scale technology and design which have in turn resulted to the scales being better.

Automation Technology: 3 Systems That Revolutionize Processing

When it comes to realizing greater efficiency and throughput, investing in automation technology is the best approach for various processing and manufacturing firms. Various types of distribution centers and warehousing businesses use technologically-guided procedures with a sole purpose of improving efficiency and reducing costs.


Automation is all about integrating new systems and technologies, installing applications, boosting labor resources, and utilizing online resources and programs to improve your business` operations. The automation systems below intended to profile three proven automation solutions for process and manufacturing operations.

Checkweighers

Checkweigher systems are solely designed to both record and actual shipping weight and make a comparison of the expected weight to the actual weight. This comparison is crucial in creating an accurate order picking which will help you avoid costly mistakes. Furthermore, checkweighers involve the checking and analysis of devices including metal detectors and sorting of machines to aid in accurate checking of other features on the pack.

Apart from being reliable and fast, dynamic checkweigher conveyor systems in particularly are highly efficient since they give accurate results within a short period by use of electromagnetic force restoration system. On the other hand, cubing systems are designed to determine both weight and dimensions of cartons and pallets being shipped for distribution. Instead of using tape measures and rulers, with this cubing system enables you to get accurate results by just placing your item onto a cubing device.

Sortation Systems

Sortation systems are designed to increase shipping efficiency and accuracy in the processing and manufacturing operations. Sortation systems are designed to meet the growing demands for increased efficiency, smaller order sizes, and frequent shipments. These demands are aimed at boosting efficiency in all your distribution operations. Sortation is perfect for separating products from a conveyor line to a shipping lane, packing stations, palletizing stations and any other sortation applications.

Sortation machines involve the use of versatile systems that have the capacity to sort a vast range of product weights, sizes to any a number of divert lanes. Furthermore, integrated sortation technology incorporates the use of proven and innovative sortation products with high technology including soft touch and dynamic discharge compensation. Integrated sortation systems will help you to effectively analyze every application so as to create sortation system solutions that perfectly suit each client`s operation.

Print & Apply Systems

Print and apply systems are essential in process and manufacturing solutions to maximize productivity. These automation systems offer you the ultimate modular label coding system that perfectly suit your product line. With the option of using specialized solutions and standard configurations, print and apply systems can be easily integrated to meet all your needs with minimum hassle.

Furthermore, you are provided with automated print and apply systems for packaging, manufacturing and supply chain system applications.A print and apply system allows for easy operation by offering clear monitoring, easy navigation and operation, minimum downtime, improved performance, increased print speed, and robust design supports. The ease in operation will help a great deal in increasing print-head life, lowering material wastage and increasing uptime in the long run.

Process and manufacturing operations require automation solutions so as to boost efficiency and productivity. Therefore, with the above three proven automation solutions, be sure to enjoy a fast, reliable, and efficient process and manufacturing operations in your firm or warehouse business.

Address Printers for Sale: 3 Retailers With the Widest Selections

If you are looking for high-quality address printers for sale, either for personal or business use, then there are a lot of online stores worth exploring. It's highly recommended that you take the time to browse through various websites, not only because the prices for address printers can significantly vary, but the level of inventory and address printer brands offered can be vastly different.

Shown here is the Pitney Bowes DA95f address printer available for sale at Walz Label & Mailing Systems.

We've helped to narrow your search for address printers for sale by featuring three online retailers that offer some of the widest assortments of address printers on the market.

Walz Label and Mailing Systems

Walz Label and Mailing Systems has been around for five decades and is widely considered as one of the best providers of business automation products, mailing machines, and address printers for sale in the Midwest. The company currently provides services as well as supplies products to thousands of businesses in the region.

The company offers for sale a wide array of address printers from brands such as Secap, Rena, Pitney Bowes, Neopost USA, Accufast, and Walco Systems. Walz Label and Mailing Systems also offers a lot of products and services related to mailing, labeling, tabbing, and mail management.

Pro Mailing Equipment Inc.

Pro Mailing Equipment Inc. is a reputable online retailer that, in addition to address printers, also offers a variety of mailing products and machines. These include mailing equipment manufactured by Bryce, Secap, Sure Feed, BCC Postal Software, and Accufast.

Pro Mailing Equipment Inc. is an authorized dealer of all of these brands. In particular, they sell several models of the Secap addressing printer from the Secap SA3000 to the Secap SA5300. If you want a fully automated mailing system, it's highly recommended that you avail of a Secap printer. One model of this printer line can print out 22,000 pieces of addresses in just an hour.

Complete Mailing Solutions

Complete Mailing Solutions is an independent dealer that sells several lines of mailing products from some of the top brands in the industry. The addressing printers that the company sells include machines from brands like Hasler and Neopost.

The listings for the products on the company's website contain in-depth information that will help you decide if the machine is what you are looking for. The company is also known for their customer support and their quick delivery of purchased products. If you encounter any problems, you can find at their website information on how to contact them. Check out Complete Mailing Solutions to learn more.

Finding a good addressing machine can be frustrating if you don't know where to look. This is not to mention the fact that there are a lot of brands and models that you need to choose from. This is why we've created the guide above. If you're looking for high-quality address printers from the biggest and most reliable brands in the industry, you should start your search on any of the three retailers we've recommended above. Just visit their websites and browse through the listings of products that they have on sale.

5 Highly-Rated Handheld Mobile Computers from Zebra

There are a wide range of handheld mobile computer products that you can choose for your company based on the functionality, capabilities, and features your business demands. With Zebra handheld mobile computers, you cannot go wrong. Below is a review of five highly-rated handheld mobile computers from Zebra.

Zebra MC17 Handheld Mobile Computer

The Zebra MC17 handheld computer is specifically intended to be used by your customers while doing their shopping. The Zebra MC17 provides a good opportunity for customers to scan items they want and create the list of items chosen. This enables them to save time at the checkout queue and also improve self service all at the press of button.

Features of the Zebra MC17

• Large battery capacity to last long
• Has web explorer to enable applications access internet
• Durable. Build to withstand drops
• Color display for rich content delivery to the customer
• Browser compatibility

Zebra MC40 Handheld Mobile Computer

The Zebra MC40 mobile computer is designed to perform several functions that will make your associates have easy time executing their duties and in serving the customers. The device can be use to call any person with any mobile computer for inquiries or assistance in the company.

The Zebra MC40 handheld mobile computer can be used to scan bar codes, look up prices or location of goods when serving the customers. And when not serving the customer, your associate can be using the Zebra MC40 handheld mobile computer in doing stock keeping or auditing prices.

Features of the Zebra MC40

• Durability. Can withstand drops and bump
• Android OS that can be transformed from customer Operating System to enterprise class Operating System
• 4.3inch touch display
• Secure payment processing system
• Can be customized with your brand logo

Zebra MC45 Handheld Mobile Computer

This computer tends to give your workforce with adequate information that will enable them to perform their work effectively to provide customer satisfaction and loyalty. This is because the Zebra MC45 handheld mobile computer is reliable in terms of reliability and durability in using it.

Features of the Zebra MC45

• Field durability. The computer can withstand drops, bumps, spills, dust and even thermal shock
• GPS access to directions and navigating in crowded places or in huge buildings
• Laser scanning tech that can scan bar codes up to distance of 4.5m away
• Wireless connectivity such as 3G and Wi-Fi enables workers to be connected out in the field and in the office.

Zebra MC55AO Handheld Mobile Computer

With sleek design and easily pocketable, this lightweight MC55AO series computer provides the best workforce experience in various sectors that include government agencies, healthcare, retail and in manufacturing companies.

The Zebra MC55AO handheld mobile computer can easily be used both indoors and outdoors as it is designed to withstand various demanding situation. You can also find this mobile computer, as well as great selection of other handheld mobile computers from Zebra at WalzEQ.com

Features of the Zebra MC55AO

• Durable because of drop and tumble endurance test results
• Advanced Bluetooth connectivity to various office equipments like printers and modems
• Keypads for easy data entry like the QWERTY and QWERTZ
• 3.5inch clear graphic display screen
• 3.2MP autofocus digital camera
• 1D and 2D scanners
• Secured data and network access

Zebra MC55NO Handheld Mobile Computer

This handheld computer is most suited for use by the work force of the company. The device is built with tough cover material that can handle several drops and exposure to elements like heat and cold. This makes the Zebra MC55NO handheld mobile computer suitable to be used outdoors. The device can easily be sanitized with available cleaners without corroding the case or damaging the delicate electronics.

Features of the Zebra MC55NO

• Powerful Marvel PXA320 Processor at 806MHz
• Memory 256MB RAM/Micro SD card slot up to 32GB
• Microsoft windows Operating System
• 3.5MP autofocus camera
• Works on any wireless LAN
• Bluetooth enabled
• 3.5inch graphic display
• Improved shock and drop resistance

To see all handheld mobile computers from Zebra, visit the official website at Zebra.com.

Load Volume Scanner: A Revolutionary New "Weighing" System

The load volume scanner has gained immense popularity and has been significantly used by many companies because of its advantages and roles in the industrial technologies and processes. The load volume scanner uses an entirely different technology that entails the use of volumetric scanning that generates 3D images of the load in the truck.

The basic inputs define the general weight per cubic meter and material density because the system takes scanned volume data and converts it to the preferred weight metrics. It is considerably used for excavation and in the mining industries mainly because it generates accurate weight and volume metrics as well it helps in ensuring that the haul trucks are loaded with the right and expected amount before it leaves the mining site.

Learn more about the load volume scanner below, or visit LoadScanner.com to take a closer look at this technology and what it can offer.

Next-Level Volumetric Scanning Technology

The load volume scanner integrates an advanced patent with pending algorithms that works with laser technology whereby it allows delivering of dynamic non-contact solution used to monitor the material loads on the trucks. The scanners have many features that ensure reading and analyzing of payloads is easily done. The scanners have lead profiling features that analyze the density of the loads accurately hence can be able to tell whether the loads can overturn the truck.

The load volume scanner is a revolutionary high capacity weighing machine that has been proven to offer great wealth and benefits many companies that include those in the construction industry, agriculture, and mining. The load volume scanner technology has been considered to provide an alternative that is cost-efficient as compared to the truck sales. Here are surefire reasons why this revolutionary system offers a sound solution for mining companies engaged in high-volume payload management operations.

Affordability & Efficiency 

The technology and components behind the load scanner has been proven to be affordable as compared to the heavy duty truck sales such as axle scales and weigh bridge scale systems. This makes the load volume scanner a very affordable investment in both industrial companies. Moreover, the load scanner can also be rented for short term use hence makes work easier and affordable.

Portability & Versatility

The scanner is easily transported from one job site to another that makes it an ideal machine needed by the mining and construction industries. The machine can be towed by any operator when they need the load volume scanner in a particular mining or construction site.

The load volume scanner executes the payload management results accurately concerning the review of different items that are loaded on the truck sales. The scanner has been considered to be suitable for a person who seeks to manage both their mining and shipping needs quickly and confidently.

An Accurate & Reliable "Weighing System"

The load volume scanner generates accurate volume metrics and converts them to weight metrics accurately. The machine generates accurate volumes and weights calculations as many times as possible and does not require to recalibrate its system. The load volume scanner has been proven to offer exceptional accuracy when determining the volume and weights of the loads on the trucks.

Load Volume Scanner Means Functionality

Besides measuring the weight and volume of the loads on the trucks, the load scanner functions by ensuring the loads are properly distributed in the truck beds. The 3D imagery by the scanner gives real-time data, and immediate feedbacks concerning any inadequacies of how the loads are distributed on the truck hence enables operators to optimize the high volumes operations. Moreover, the system gives real-time data with a variety of variables that influence the actual performance of the loaded truck.

Kiosk Display & Software Integration

The load volume scanner system allows users to manage and operate loads on the trucks using an exceptional touch screen kiosk system. The system is fully dynamic and integrated software that conveys comprehensive solutions to the payload management operations. The load volume scanner has been proven to be suitable for an advanced industry application and its payload management systems.

5 Top-Rated Industrial Barcode Printers in Review

When buying the best industrial barcode printers, you must have information about their reviews when you need to buy a good one within a given market. Through the reviews, you will know what to look for as features go in terms of some of the top barcode printers with industrial-grade technology. Here is a review of the top five industrial barcode printers currently leading the market today.

1. Datamax M-Class Mark II Barcode Printer

The Datamax M-Clas Mark II barcode printer is an exceptional industrial printer that you can buy when planning to buy one. It has smaller footprint that makes it ideal for users looking for powerful industrial printers with space limitations. The M-Class 4206 printer from Datamax is a perfect solution for healthcare, logistics, and warehouse or retail applications. Its modular design makes the maintenance and replacement of parts easy since it has a flexible design that allows for a wide of options when using it.

When using it, you will have an increased productivity that makes it one of the best industrial barcode printers when you compare to other models available for sale.

2. Zebra 110Xi4 Industrial Barcode Printer

This Zebra 110Xi4 Industrial Barcode Printer is one of the highly rated printers that you can buy when you want a perfect one during your purchase. Some of its features will definitely makes it excellent is its ability to handle everything that ranges from paper to tag stocks and specialty label when using it.

When using it, you can easily change it from one given label media the other. With a consistently high quality print, you will get a range of thicknesses when you need these amazing deals well. It has tiny component labels, compliance labels, and wide-web (such as chemical drum) labels, which makes it excellent when you need a good printer during your purchase.

3. Zebra 140Xi4 Industrial Barcode Printer

These Zebra 140Xi4 printers can easily maintain pace with the high-volume production line. When using them, you will get a 14"/356 mm-per-one-second print in terms of speeds thus providing one of the top technologies on the market. You will improve productivity in the batch printing with the print-and-apply lines.

When you buy them, you will have a fast processing to improve your productivity. This printer has a powerful memory that can stores more fonts, label formats, and graphics. It also compatible with most Zebra industrial barcode readers and scanners.

4. The Zebra 105SLPlus II Industrial Barcode Printer

This Zebra 105SLPlus II Industrial Barcode Printer will provide you an icon-based with a multilingual graphical LCD interface. When using it, you will be able to minimize user training thus making the printing process faster and simpler. It is also durable when compared to other models that you can easily get in the market during your purchase.

5. Zebra 170Xi4 Industrial Barcode Printer

The Zebra 170Xi4 Industrial Barcode Printer can help you improve your pace when working with a high-volume production line. As one of the leading industrial printers from Zebra, has a fast processing ability to increase your productivity. With its durable printhead mechanism, you will deliver an outstanding print quality when using it at the same time reducing downtime for the printhead replacement.

In conclusion, the above is a review of the top five industrial barcode printers that you can choose when buying them from a given market.

5 Most Recent and Effective Innovations In Chiropractic Care

Chiropractic is a holistic health practice that involves the examination of the diagnosis and treatment of mechanical and structural disorders experienced in the spine and the skeletal structure. The process is bounded by different types of spinal adjustments based on the complication experienced. The most common one though is the spinal misalignment.

Manual adjustment methods have been in use for quite a while in this treatment but thanks to advancement in technology, new equipment has found its way in the chiropractic field heightening it to a greater level. Here are the most effective innovations in chiropractic care.

1. Disc Decompression Machines

Disc decompression is among the most potent and innovative systems in the chiropractic field. Its main operation module is offering therapy that aids in stretching and relaxing the spinal cord. With the regular upgrades and advancements, disc decompression machines are set with computerized technology that is used to regulate the amount of stress applied to the spine.

Due to this feature, chances of muscle contractions can hardly be encountered. To make it even more convenient and reliable, disc decompression tables can be adjusted according to the patients' needs to achieve more comfortable and relaxing sessions.

2. Laser Therapy 

Laser therapy is another innovative invention that has served a significant purpose in chiropractic. Class IV or cold laser therapy is structured with top notch technology that enables it to offer fast healing in the treatment process. This implement is effective at relieving chronic pains, severe injuries, and arthritis.

The curative property behind cold laser therapy is endowed with an infrared red light that penetrates the injured spots to offer relief from pain. It can also be used to heal wounds, reduce inflammation and repair broken tissues and muscles. Laser therapy is a reliable procedure that has been accredited to be painless, safe and productive, and is now being adopted by most chiropractors

3. Adjustment Instruments

Spinal adjustment instruments are used to treat joints’ complications and to improve their performance. The complications addressed here include joint pains, inflammation, and misalignment. There are various marques offering these machines: the top ones include ProAdjuster and Pulstar.

These chiropractic adjustment tools are deemed potent than the previous treatment modes since they are safer, and they can solve different body complications. They are inbuilt with computerized systems that are set with contemporary treatment inventions in chiropractic.

4. Insight Subluxation Station

Patients can get their chiropractic conditions with the use of this machine. The Insight Subluxation Station can be able to scan the patients and give out accurate results, that will in turn help to decide on the better and efficient treatment to opt for. There are various modern applications in this tool that facilitates the tool’s accuracy. Appropriate safety standards have been put into account as well.

5. Extracorporeal Shock Wave Therapy

Another great innovation in this field is the Extracorporeal Shock Wave Therapy that has revolutionized the chiropractic treatment with a significant step. Its treatment module is centered on therapeutic ultrasounds that can generate strong shock waves. It is used to treat injuries and muscle problems such as the muscle strains. The only drawback linked to this therapy is denaturing of tissues.

The need for chiropractic care has risen due to increase in spine and other bone complications. This has fueled research in this sector that has in turn led to diverse inventions and innovations to cater for the treatment. Among the most recent and effective innovations ever experienced in this field have been shown above.

If you're looking for a chiropractor who can offer some of these specialized therapies and advanced chiropractic treatments, visit:

Bly Family Chiropractic
2501 E College Ave. Ste. C
Bloomington, IL 61704
Phone: (309) 661-1155
www.BlyChiropractic.com

Strapping Machines: Breaking Apart Today's Strapper Technology

The most important job of a strapping machine is to ensure that users deliver goods to their customers safely. By not selecting the right strapping machine, no matter how effective your quality control is, if the product doesn’t get packed properly, then it won’t satisfy the customers need.

This article is intended to offer insight on various forms of strapper technology and how to get the perfect strapping machine specially designed for your application. But first let’s clear the confusion that exists between semi-automatic strapping machines and automatic strapping machines. These two are the basic types of strapping machines for sale, but we there are also other types that you will find on the market.

Automatic vs. Semi-Automatic Strapping Machines

• Semi-automatic strapping machines: Semi-automatic strapping machines are ideal for low volume operations, backups or offline strapping. They are not very long, and their typical size is that of a small desk. Unlike the fully ones the semi- automatic strapping machines requires an operator, where he or she picks the loose end of a strap fed on the machine, and using his hand loops it around the package and feeds it to the other end of the sealing area. The machine then tensions the strap as per set tension.
• Fully automatic strapping machines: Unlike the semi-automatic they do not require an operator, they allow hand free operation and the operation of strap process is usually by a foot pedal, or a push button a little bit pricier that semi ones. They are high-performance machines ideal for heavy duty use and the strapping time on them can be less than 3 sec.

Features to Consider When Choosing a Strapping Machine

There a wide range of features in today's semi-auto and automatic strapping machines for sale on the market. Some of the primary features you'll want to consider include:

• 1. Auto feed: without having this feature, strapping a package can be extremely difficult. But sometimes you do not need it if you are changing your coils ever month, but if you are doing it each and every day, then do not overlook this important feature.
• 2. Loop Ejection: Loop ejects feature increase reliability and the production continuity. Without it, you will have to re-set the machine manually if there is any jam. If you have high volume operation this a feature that shouldn’t be overlooked.
• 3. Size: it is important to size your strapping machine according to your package volume. It would be very wise and less costly if you choose the semi-automatic machine when performing low-volume operations. The semi automatic strapping machine might also prove valuable in the event of your fully automatic machine is down or jammed.
• 4. Strap type:- Just like any other industrial equipment, a strapper requires a certain amount of maintenance. So make sure you use a good strap, one that is consistency in width and the gauge and one that has minimal curves. I find many machines problem resulting from the type of strap in usage.

There are other features like the strapping speed, the power supply and consumption and the strap width, thickness and length, all that should not be ignored.

There are huge selections of strapping machines currently on the market, some of the very brand new and some comes as second hand. Some people prefer going for the second hand because of the price factor, and if you decide to own a second hand strapping machine make sure it’s refurbished and fully working and, if possible, find one with parts and labor warranty.

If you use the above checkpoints when selecting the right strapping machine, you will definitely get encouraging feedback from satisfied customers.